Useful information part 4, Troubleshooting, Specifi cations – Casio 140CR User Manual
Page 38
![background image](https://www.manualsdir.com/files/828980/content/doc038.png)
38
E
1. Troubleshooting
Symptom/Problem
Most common causes
Solutions
1
E01 appears on the display.
Changing modes without complet-
ing transaction.
Return mode switch to where it stops buzz-
ing and press
p.
2
E08 appears on the display.
Sign on operation is not performed.
Prior to starting registration of any other
operation, press
Z
~
<
and then
:.
3
E94 appears on the display.
Printer paper is jammed.
Remove jammed paper. Turn Mode switch
to OFF then turn to ON, or Turn power OFF
and then turn power ON.
4
No date on receipt.
Paper is not advancing enough.
Printer is programmed as a journal. Program printer to print receipts.
5
Drawer opens up after ringing up
only one time.
Department is programmed as a
single item dept.
Program the dept. as a normal dept.
6
Not clearing totals at end of day
after taking report.
Using X mode to take out reports.
Use Z mode to take out reports.
7
Programming is lost whenever
register is unplugged or there is
a power outage.
Bad or no batteries.
Put in new batteries.
8
Register is inoperative.
Can’t get money out of drawer.
No power.
Pull lever underneath register at rear.
9
E90 appears on the display.
Totals remain in the memory.
Issue the general control reset report, peri-
odic reset report and PLU reset report.
2. Specifi cations
INPUT METHOD
Entry:
10-key system; Buffer memory 8 keys (2-key roll over)
Display (LED): Amount 8 digits (zero suppression); Department/PLU No.; No. of repeats
PRINTER
Journal:
12 digits (Amount 10 digits, Symbol 2 digits)
(or receipt)
Automatic paper roll winding (journal)
Paper roll:
58 mm
× 80 mm ∅ (Max.)
CALCULATIONS
Entry 8 digits; Registration 7 digits; Total 8 digits
CALCULATOR FUNCTION
8 digits; Arithmetic calculations; Percent calculations
Memory protection batteries:
The effective service life of the memory protection batteries 3 (UM-3, or R6P (SUM-3) type
batteries) is approximately one year from installation into the machine.
Power source/Power consumption: See the rating plate.
Operating temperature: 0°C to 40°C (32°F to 104°F)
Humidity:
10 to 90%
Dimensions/Weight: 188 mm(H)
× 330 mm(W)× 360 mm(D) with S drawer
4 kg with S drawer
205
mm(H)
× 410 mm(W)× 450 mm(D) with M drawer
8 kg with M drawer
Specifi cations and design are subject to change without notice.
USEFUL INFORMATION
Part 4