Setting the time, Watertightness – Auriol 101503-14-xx User Manual
Page 31
31
GB/MT
Setting the time
1. To set the time, pull the crown
2
out to the 1st position
5
.
2. Turn the crown
2
to set the hour and minute hands
4
,
1
.
3. When the crown
2
is pushed back to the normal position the
second hand
3
begins to run.
Watertightness
This watch is watertight to 3 bar in accordance with DIN 8310.
Figure C shows the permissible areas of use. Please note that the
watertightness is not a permanent feature. It should be checked
annually and particularly before subjecting it to special conditions, as
the function of the inbuilt sealing elements diminishes with daily use.
Shortening the watch strap (101503-14-02
/ 101503-14-04 / 101503-14-05)
Note: The watch strap procan be shortened by
adjusting the fastener
6
or removing segments
7
. To
this purpose you should use the repair set
8
supplied.
101503_IT.indd 31
8/6/2014 11:45:41 AM