Timer mode – Auriol Z31793 User Manual

Page 13

GB/IE

Timer mode

In Timer mode, 3 time fields appear. A timer is provided in each of
the three fields (Fig. D).

Setting the desired time

Press and hold the T1 key

for 3 seconds. The field next to

the key flashes, thus signalling that a time can be set.

Press the SEC key

, the MIN key

or the HR key

change the displayed values for seconds (SEC), minutes
(MIN) or hours (HR) in steps.

TIP: Press and hold the key to make the numbers change
more quickly.

Press the T1 key briefly to confirm your setting. The display of

Timer 1 stops flashing and shows the set time.

Set the timers next to the T2

and/or T3 keys

in the same

way.

Activating set timers
The timer is in Timer mode and the selected timer displays the
selected time.

Press the T1 key

again to activate the topmost timer. The

counter now begins counting down to 0. When the set time
has elapsed, a signal tone will sound for the period of one
minute. The timer display flashes, the message „TIME‘S UP“