Auriol Z31793 - Manual (Page 11)

11 GB/IE
Open the battery compartment cover by pushing it outwards
in the direction of the arrow. Remove the insulation strip.
Close the battery compartment cover again.
Your digital timer is now ready for operation.
Setting up the device
You can set up the device on horizontal, flat surfaces, by folding
the stand
11 downwards (see Fig. B). Alternatively, you can use
the magnet 13 to fasten the device to magnetic surfaces.
Q
Operation
Modes of the device
The digital time has two modes, which are displayed at the top of
the display
1 .
Press the CLOCK (TIMER) key 5 to switch back and forth
between the Clock and Timer modes.