Operation, Setting the time, time zone and weekday manually – Auriol Z31408 User Manual

Page 76

76 GB/MT

Operation

Setting the time, time zone and

weekday manually

Press and hold down the MODE button

for approx.

3 seconds. The minute display

ﬂashes.

Press the UP or DOWN button

to set the

desired time zone (–12 hours to + 12 hours).
Note: Should you be in a country in which the DCF
signal can be received but the time is diﬀerent to your
current local time, you can use the time zone setting
to have the clock display your current local time. For
example, if you are in a country where the local time
is one hour behind Central European Time (CET), then
you should set the time zone to + 01. The time continues
to be controlled by DCF but the clock shows one hour
more.

Press the MODE button to conﬁrm your setting.

Set the hours, minutes, the year, the day and the lan-

guage of the weekday in the same manner.

Note: The following languages are available:
GER = German
ENG = English
DAN = Danish

E
N
IT
F

86663_aur_Funkwecker_Content_LB5.indd 76

21.01.13 13:26