Auriol Z31408 - Manual (Page 74)

74 GB/MT
Operation
As soon as the batteries are inserted, automatic reception
of the radio signal begins. The correct time and the date
are displayed after 3–10 minutes. During reception, all
buttons are deactivated except the DOWN button
11 and
the SNOOZE / LIGHT button 19 . You can stop the reception
of the radio signal by pressing the DOWN button. To restart
the reception, press and hold down the DOWN button.
Note: Do not change the location of the projection radio-
controlled alarm clock during reception. This may disrupt
reception.
Radio Signal (DCF):
The DCF signal (time signal transmitter) consists of time
impulses, which are transmitted from one of the most
accurate clocks in the world, in the proximity of Frankfurt /
Main, Germany – it varies by 1 seconds in 1 million years.
Your radio-controlled alarm clock will receive the time sig-
nal under optimum conditions up to a distance of approx.
1,500 km from Frankfurt am Main, Germany. Reception
of the radio signal generally takes approx. 3–10 minutes.
R
(
e
o
a
T
86663_aur_Funkwecker_Content_LB5.indd 74 21.01.13 13:26