Auriol Z31311 - Manual (Page 31)

58 GB/MT 59 GB/MT
Note: The AM symbol 3 stands for the morning
hours in 12 hour mode. The PM symbol 2 stands for
the afternoon hours in 12 hour mode.
Note: You may select display of the weekdays 15 in
different languages. The default setting is German.
The following languages are available:
ENG = English
GER = German
FRE =
French
ITA = Italian
DUT = Dutch
SPA = Spanish
DAN = Danish
POR = Portuguese
Setting the alarm
Alarm 1 7 :
1. Briefly press the ALARM key 22 once. The time
set for the alarm will be displayed in the LC display.
2. Press the ALARM key 22 and hold for about 2
seconds. The hour display blinks.
3. Press the + / 12 / 24 key 23 or the - / C / F /RCC
key 24 to set the desired value. Press the ALARM
key 22 to confirm your entry.
4. The minute display blinks. Repeat step 3 to set the
value for the minutes.
Alarm 2 8 :
1. If the projection radio-controlled alarm clock is in
time display mode, briefly press the ALARM key
22 twice.
2. Press the ALARM key 22 and hold for about
2 seconds. The hour display blinks.
3. Press the + / 12 / 24 key 23 or the - / C / F /RCC
key 24 to set the desired value. Press the ALARM
key 22 to confirm your entry.
4. The minute display blinks. Repeat step 3 to set the
value for the minutes.
Activating / deactivating the
alarm
Briefly press the ALARM key 22 once or twice to
reach Alarm 1 or Alarm 2 mode.
Press the + / 12 / 24 key 23 until the Alarm 1
symbol 7 or the Alarm 2 symbol 8 appears on
the LC display. The alarm is activated.
Press the + / 12 / 24 key 23 until the Alarm 1
symbol 7 or the Alarm 2 symbol 8 on the LC
display goes out. The alarm is deactivated.
Switching off the alarm
During the alarm, press any key except the
SNOOZE / LIGHT key
17 to stop the alarm.
It is not necessary to reactivate the alarm. It
automatically switches itself on in the set weekly
rhythm.
Note: The alarm switches itself off after one
minute.
Activating the slumber function
During the alarm, press the SNOOZE / LIGHT key
17 to stop the alarm. The alarm automatically
switches back on after 5 minutes.
78346_silv_Projektions-Funkwecker_Content_LB5_02.indd 58-59 8/9/12 2:43 PM