Operation, Displaying dst summertime, Setting the alarm – Auriol Z30398 User Manual
Page 72: Turning the alarm on / off, Using the snooze function
72 GB/MT
Operation
Q
Displaying DSt summertime
Summertime is automatically displayed on the LCD by the icon
3
. The DCF radio signal
indicates to the clock whether or not it is summertime.
Q
Setting the alarm
j
Stop the reception of the DCF radio signal.
j
Press and hold down the ALARM button
15
. The hour display flashes.
j
In order to enter the hours figure, press the + / MEM button
16
or the – / °C / °F / WAVE
button
17
. Confirm your input by pressing the ALARM button
15
. Repeat this step to
enter the minutes.
Q
turning the alarm on / off
j
Stop the reception of the DCF radio signal.
j
Press the ALARM button
15
in order to activate or switch off the alarm.
If the alarm is activated, the alarm symbol appears in the LC display.
Q
Using the snooze function
j
While the alarm is sounding, press the SNOOZE button
19
in order to activate the
snooze function. The alarm stops and then goes off again after a period of 5 minutes.