Electrolux LAVAMAT 84745 - Manual (Page 42)

Operating Instructions
42
Additional rinse cycle (RINSE+)
The washing machine is set for very economical water consumption.
However, for people who suffer from allergies to detergents, it can be
helpful to rinse with extra water.
3 If this function is selected, an extra rinse is added to the COTTONS/
LINEN, EASY-CARES, EASY IRON and DELICATES programmes.
When delivered, the machine is not set for the additional rinse.
To set the additional rinse:
0 1. Turn the programme selector to SHORT SPIN.
2. Press and hold the SENSITIVE button for at least 5 seconds.
When the button has been pressed for 5 seconds, RINSE
+
flashes on
the Programme Progress display for 5 seconds.
3. While RINSE
+
is flashing, release the SENSITIVE button.
When it stops flashing, the additional rinse is set. It remains set until
cancelled again.
When the additional rinse has been set, the RINSE
+
indicator flashes
on the display before the programme starts and during the additional
rinse.
4. If you want to check whether the additional rinse has been set:
– Turn the programme selector to SHORT SPIN.
– Push the SENSITIVE button briefly.
If RINSE
+
flashes on the Programme Progress display, the additional
rinse has been set.
To cancel the additional rinse:
0 1. Turn the programme selector to SHORT SPIN.
2. Press and hold the SENSITIVE button for at least 5 seconds.
As soon as the button is pressed, RINSE
+
flashes on the Programme
Progress display. After 5 seconds, RINSE
+
stops flashing and remains lit
continuously for another 5 seconds.
3. While RINSE
+
is lit continuously, release the SENSITIVE button.
When RINSE
+
is no longer lit, the additional rinse has been cancelled.
3 An additional rinse cycle increases water consumption and the pro-
gramme duration.