Electrolux LAVAMAT 84745 - Manual (Page 35)

Operating Instructions
35
Water is not entering.
Error code
(1
ap-
pears.
Water tap is closed. Open water tap.
Filter in the socket of the in-
let hose connection is
blocked.
Close water tap. Disconnect
hose from water tap, remove
filter and clean under
running water.
Water tap is blocked with
limescale or is faulty. Check the water tap and
have it reaired if necessary.
Washing machine vi-
brates during operation
or is unstable.
Transport packaging has not
been removed.
Remove transport packaging
according to setting up and
connection instructions.
The machine is not level.
Adjust the feet according to
installation and connection
instructions.
There is very little washing in
the drum (e.g. only a dressing
gown).
This does not affect the op-
eration of the machine.
Water could not be fully
pumped out before spinning
because the drain hose is
kinked or water pump is
blocked.
Check the drain hose and re-
move any kink if necessary,
or clean the drain pump and,
if necessary, remove foreign
bodies from the pump hous-
ing.
Excessive foaming dur-
ing the main wash. Probably too much detergent
has been used.
If may be necessary to re-
duce the amount of deter-
gent used. Follow the
detergent manufacturer’s
recommendations.
Problem Possible cause Remedy