Electrolux LAVAMAT 84745 User Manual
Page 28
Operating Instructions
28
If the EASY IRON programme was selected:
After the EASY IRON programme has finished an anti-crease phase,
lasting approximately 30 minutes, follows. Here, the multi display
shows the remaining time (e.g. 1 minute) and the END indicator is
illuminated. The washing can be removed at any time during the anti-
crease phase.
0
1. To remove the washing during the anti-crease phase, press the START/
PAUSE button. The door can now be opened.
2. Then turn the programme selector to OFF.
The wash programme has come to an end.
3
If the OVERDOSING indicator illuminates, then too
much detergent was used in the washing programme
just completed. Observe the dosing recommendations
of the detergent manufacturer as well as the load quantity for the next
wash.
Important: If the washing machine is not to be used for a long period:
Close the water tap and disconnect the washing machine from the
electricity mains. (Anti-flood: The Aqua Control with Aqua Alarm does
not function if the power supply is interrupted).