EVGA X58 3X SLI - Manual (Page 59)

Configuring the BIOS
Memory Feature
Select Memory Feature from the Frequency/Voltage Control menu and press
Enter to display the Memory Feature menu.
Figure 12. Memory Feature Menu
Memory Control Setting
This function is allows you to select the Memory Control Setting.
Memory Frequency
This function is allows you to select the Memory Frequency. The options are
Auto, 800Mhz, 1067Mhz, 1333Mhz, and 1600Mhz.
Channel Interleave Setting
This function is allows you to select the Channel Interleave Setting. The
options are 1 way, 2 way, 3 way, 4 way, 5 way and 6 way.
   :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Memory Control Setting [Disabled]
Memory Frequency [Auto]
Channel Interleave Setting [6 way]
Rank Interleave Setting [4 way]
Parameters Setting Current
tCL Setting [Auto] 8
tRCD Setting [Auto] 8
tRP Setting [Auto] 8
tRAS Setting [Auto] 19
tRFC Setting [Auto] 59
Command Rate [Auto] 1T
tRRD Setting [Auto] 4
tFAW Setting [Auto] 20
tRTP Setting [Auto] 4
tWR Setting [Auto] 8
Round Trip Latency [Auto] 52
tddWrTRd Setting [Auto] 5
tdrWrTRd Setting [Auto] 5
tsrWrTRd Setting [Auto] 14
tddRdTWr Setting [Auto] 10
Item Help
Main Level
Phoenix – AwardBIOS CMOS Setup Utility
Memory Feature