Electrolux EKG 60111 - Manual (Page 73)

electrolux 73
Adaptation to different
kinds of gas
To adapt the appliance to a different kind
of gas from the one the appliance has
been set for, follow the instructions below
in their order.
Gas connection
LPG : use the rubber pipe holder «C».
Natural gas : use the pipe fitting «A».
Always insert the gasket «B». Then
proceed with the gas connection, as
indicated in the relevant paragraphs.
Hob burners nozzles
replacement
- Remove the pan supports.
- Extract the caps and the wall baffles
of the burners.
- Using a socket spanner 7 unscrew
and remove the nozzles replacing
them with the ones required for the
kind of gas in use (see table "Burner
characteristics").
Reassemble the parts following the
same procedure backwards.
These burners do not need any primary
air regulation.
Hob burners - Adjustment of minimum
level
To adjust the minimum level:
1) turn the knob to the position of
minimum flame;
2) remove the knob;
3a)when converting from natural gas to
LPG, tightly screw the by-pass
screw of the cocks;
FO 2127
FO 0392
By-pass screw