Epson EMP MONITOR OPERATION V4.30 - Manual (Page 38)

E-mail notification of problem/warning/status
38
Messages to inform that the projector has recovered from the error or
warning statuses are sent.
Other error Stop using the projector, disconnect the power
cable from the electrical outlet, and contact
Epson.s Projector's User's Guide
Supply System Error
(Ballast)
Auto Iris Error
Network error (TCP
connection error) Check that the projector's power is turned on and
the LAN cable is connected, and also check that
Network Monitoring is set to ON and Standby Mode
is set to Network ON. s Projector User's Guide
Network error
(ESC/VP.net
communication error) Check that the projector has been correctly
connected to the network. s Projector User's
Guide
Network error
(monitor password
authentication error) Check the projector's Monitor Password.
Message Remedy