Monitoring window layout – Epson EMP MONITOR OPERATION V4.30 User Manual
Page 24
Monitoring window layout
24
The icon patterns and their meanings are explained below.
Type: Displays the projector status.
No warnings or problems
*1
Warning or problem
An error has occurred on the projector.
Notification
The projector requires immediate attention.
Monitoring disabled
The projector is not being monitored. If you right-click the icon and
select Monitoring enabled, the projector will be added to the
projectors that are being monitored.
Data being updated
Network error (monitor password authentication error)
No Monitor Password was entered when the projector was registered,
or an incorrect Monitor Password was entered. s
Network error (TCP connection error)
*2
Network error (ESC/VP.net communication error)
*3
Group name: When projectors are registered to a group, the name of the
group that the projector belongs to is displayed.
Display name: Shows the display name.
Power: Shows the power on status for the projector.
Power on and normal status
Power on and abnormal status
Power off and normal status
Power off and abnormal status
Lamp Hours: Shows the lamp operating time for the projector.
Temperature level: The following five icons display the differing internal
temperature status of the projector.
Internal temperature
normal
High-temperature
warning
Internal temperature
normal
Internal temperature error
High-temperature
warning
Error information: Shows a notification or warning/problem status using
the following icons.
Clean Air Filter Notice
Lamp Cover Open
Replace Lamp
*4
Lamp Error
High-temperature warning
Lamp failure at power on
Replace Air Filter
High internal temperature error
No Air Filter
Internal Error
Low Air Flow
Fan error
Air Flow Sensor Err.
Sensor error
Low air flow error
Supply System Error (Ballast)
Air filter air flow sensor error
Auto Iris Error
Other error