Using the control functions – Epson EMP MONITOR OPERATION V4.30 User Manual
Page 32
Using the control functions
32
The following table shows the meanings of the control buttons.
*
If the button does not function, you can switch the input source using the
EasyMP control button.
• Some connected projectors may not be equipped with all of the above
ports or functions. If you click a button for a port or function that is not
available, nothing will happen.
• You can select objects to be controlled and use the control buttons to
carry out control operations even when the following are being
displayed.
Group properties s
Projector properties s
Warning and Error Projector list
(Control operations can only be carried out for projectors with a
warning status.) s
Carrying out control using a web browser (Web
control)
You can use the computer's web browser to change the configuration
menu settings for projectors.
Procedure
A
Right-click on the icon of a projector to be controlled in
Grouping view or Detail list view and select "Web control".
B
The web browser will open and the Web control window will
be displayed.
Web control lets you set the same details as the configuration menu for
the projector. s Projector User's Guide
Power On
Turns the projector power on.
Power Off
Turns the projector power off.
Switch source
Computer1
Switches the video input source to the
Computer1 port or Computer port.
Switch source
Computer 2
Switches the video input source to the
Computer2 port.
Switch source
BNC
Switches the video input source to the BNC
port.
Switch source
S-Video
Switches the video input source to the
S-Video port.
Switch source
Video (RCA)
Switches the video input source to the Video
port or video2 port.
Switch source
Video (BNC)
Switches the video input source to the Video1
port.
Switch source
DVI, HDMI
Switches the video input source to the DVI
port or HDMI port.
Switch source
D-Video
Switches the video input source to the D4
port.
Switch source
EasyMP
Switches to EasyMP or EasyMP.net.
Switch source
USB Display
*
Switches to USB Display.
Switch source
USB
*
Switches the video input source to the
external equipment connected via a USB
(Type A) port.
Switch source
LAN
*
Switches the video input source to the image
currently projected by EMP NS Connection.