Epson EMP MONITOR OPERATION V4.30 - Manual (Page 28)

Monitoring window layout
28
The icon patterns and their meanings are explained below.
* You can display Replace lamp at any time preset at Environment setup in
the Tool menu.
Detectable error information differs with the projector you are using.
Checking properties in detail
You can check the properties of groups and projectors in detail.
Displaying group properties
Procedure
You can use either of the following methods to display the proper-
ties.
• Displaying the properties for all groups in Grouping view
Right-click in Grouping view and select Property.
Type: Shows the group or projector status.
Display name: Shows the display name.
Power: Shows the power on status for the projector.
Power on and normal status Power on and abnormal status
Power off and normal status Power off and abnormal status
Lamp Hours: Shows the lamp operating time for the projector.
Source: Shows the input source that has been selected for the projector.
Computer or Computer1 DVI or HDMI (Digital)
Computer2 D-Video
BNC Easy MP
S-Video USB Display
Video(RCA) USB
Video(BNC) LAN
Temperature level: The following five icons display the differing internal
temperature status of the projector.
Internal temperature
normal High-temperature
warning
Internal temperature
normal Internal temperature error
High-temperature
warning
Error information: Shows the warning or problem status using the
following icons.
Replace Lamp * Lamp Error
High-temperature warning Lamp failure at power on
Replace Air Filter High internal temperature error
No Air Filter Internal Error
Low Air Flow Fan error
Air Flow Sensor Err. Sensor error
Low air flow error Supply System Error (Ballast)
Air filter air flow sensor error Auto Iris Error
Lamp Cover Open Other error