beautypg.com

Getting started, Unpacking your rcd869 micro system, Installation – Curtis RCD869 User Manual

Page 7

background image

5

Getting Started

Unpacking your
RCD869 Micro System

Carefully remove your CD micro system from
its packaging. You may wish to store the
packaging for future use.
Box Contents:

CD micro system

2 speakers (speaker cables attached)

Remote control

• AM Loop Antenna

User Guide

Installation

Speaker Connection

1. Unwind the cable from each speaker.
2. At the rear of the CD micro system there

are two speaker sockets.

3. Plug the speaker located on the right into

the socket marked ‘R’ and coloured red.

4. Plug the speaker located on the left into

the socket marked ‘L’ and coloured white.

5. For optimal stereo effect, place the

speakers approximately 1.5m apart.

AC Power Connection

1. Connect the mains plug to a mains supply

socket and switch on the supply.

2. At the front of the CD micro system unit,

press the STANDBY button.

3. The LCD display will light up.

Antenna

The FM antenna is attached to the back of the
unit. Unwind the wire. Positioning is described
in the Radio section.
The

AM antenna is a separate loop aerial

that plugs into the back of the unit at the socket
marked ‘

AM ANT.’. Its assembly is described

in the Radio section.

AC CONNECTION

Plug the power cord into an AC outlet

having 120v,60Hz only. Connecting this

unit to other power sources may damage

the unit.

NOTES:

*The AC polarized to help minimize the

possibility of electric shock. If the

polarized plug does not fit into a

nonpolarized AC outlet, do not file or

cut the wide blade; it is the user`s

responsibility to have an electrician

replace the obsolete outlet.

*The power cord should be unplugged

from the outlet when the unit is not

going to be used for a long period of time.

This manual is related to the following products: