Curtis RCD869 - Manual (Page 14)

12
Programmed Playback
Up to 20 tracks can be programmed for
playback.
Using the remote control:
1. Press the PROG,/MEMORY button.
MEMORY will flash on the display, the
track number is shown on the left and
the program number on the right, as
below.
2. Use the TRACK/TUNE buttons to select
the desired track number to be played
back first.
3. Press the PROG,/MEMORY button. The
display will increment the program
playback number.
4. Use the TRACK/TUNE buttons to select
the track number to be played back
second in the programmed sequence.
5. Press the PROG,/MEMORY button.
6. Repeat this process until you have
entered all of the tracks you wish to
play back in the programmed
sequence..
7. Press PLAY/PAUSE to start playback.
Play back will start with first track
selected.
8. To stop playback press STOP/BAND
9. Opening the CD door will clear program.
Using the unit controls:
1. Press PROG./MEMORY. MEMORY will
flash on the display, the track number is
shown on the left and the program
number on the right, as above.
2. Use the SKIP buttons to select the
desired track number to be played back
first.
3. Press PROG./MEMORY. The display will
increment the program playback
number.
4. Use the SKIP buttons to select the track
number to be played back second in the
programmed sequence.
5. Press the PROG./MEMORY button.
6. Repeat this process until you have
entered all of the tracks you wish to
play back in the programmed
sequence..
7. Press PLAY/PAUSE to start playback.
Play back will start with first track
selected.
8. To stop playback, press the STOP/
BAND button.
9. Opening the CD door will clear program.
Random Play
1. With the CD loaded, press RANDOM on
either the remote control or the unit. The
tracks will be played in a random order.
2. To cancel random play, either press
RANDOM or STOP/BAND on the remote
control, or STOP/BAND on the unit.
Repeat Play
1. Press the M-UP/REPEAT on either the
remote control or the unit once, to
repeat playback of the same track. The
REPEAT indicator will flash on the
display.
2. To repeat all tracks, press M-UP/
REPEAT twice. The REPEAT indicator
will stop flashing and remain on.
3. To cancel, press M-UP/REPEAT on the
unit until the REPEAT indicator
extinguishes.
You can also cancel the repeat function
by pressing either STOP/BAND on the
remote control or STOP/BAND on the
unit.