beautypg.com

Technical, Optional ac adapter specifications, Physical dimensions – Epson 700 User Manual

Page 3: Safety specifications, Box contents, Minimum system requirements, Using batteries, Charging batteries, Epson photopc 700, Minimum system requirements using batteries

background image

EPSON PhotoPC 700

5/98

EPSON PhotoPC 700

- 3

Technical

Optional AC Adapter Specifications

Physical Dimensions

Safety Specifications

Technical

Box Contents

❏ PhotoPC 700 camera and handstrap

User’s Guide

❏ 4 AA NiMH rechargeable batteries and battery charger

❏ Serial cable for PC

❏ Macintosh

®

serial cable adapter

❏ Standard serial cable for Direct Print

❏ Tiffen

®

lens adapter for optional wide angle, telephoto, and

close-up lenses

❏ Software on CD-ROM: Sierra

®

Image Expert

with

diskette creation utility, EPSON Photo!2 application and
TWAIN driver, EPSON Photo File Uploader, EPSON
Photo!2 Program Uploader

❏ Software on camera: Direct Print program

Minimum System Requirements

Using Batteries

PhotoPC 700 comes with four rechargeable NiMH batteries
and a charger.

Charging Batteries

It’s important to make sure your batteries are fully charged, so
they will last as long as possible before they need recharging.

WARNING
Shock hazard. Make sure you use the charger only with EPSON
rechargeable NiMH batteries (model EU-23). To avoid the danger of
leakage or explosion, do not place any other batteries in the charger.
Read all safety and handling instructions before using the charger.

Note the following when charging batteries:

❏ Do not insert batteries backwards.

❏ Do not open the cover while batteries are charging.

Model number

EU-23

Input

120 V AC, 60 Hz

Output

1.2 V DC/650 mA

×

4

Charging time

Approximately 160 minutes

Power consumption Approximately 8 W

Charging
temperature

32 to 95°F (0 to 35°C)

Width

1.97 inches (50 mm)

Height

1.18 inches (30 mm)
1.85 inches (47 mm) including pins

Depth

3.74 inches (95 mm)

Certifications

UL, SA

Model number

EU-19

Product code

B867038

Output

DC 7V/2.0A

Input

110 to 120 V AC, 50 to 60 Hz

Windows

®

Macintosh

®

Processor

486 or higher

Power PC

™ or higher

processor

Operating
System

Windows 95, Windows 3.1
or later, Windows for
Workgroups

3.11 or later,

or Windows NT

4.0

System Software
Version 7.1 or later
(System 7.5 or later
required to access
CompactFlash card
memory directly from
the Macintosh.)

RAM

At least 16MB

At least 16MB

Ports

Serial port with standard
RS-232C interface

Standard Macintosh
modem/printer port

Display

640

×

480, 256 colors

640

×

480, 256 colors

Hard drive
space

At least 30MB

At least 30MB

CD-ROM
drive

Double-speed

Double-speed