Parkside PLEM 50 A1 User Manual
Page 87
GB
84
PLEM 50 A1
Faults
Possible cause
Rectifi cation
156
Received signal too
strong
Avoid highly refl ective or mirrored
surfaces.
Find a measurement point that is
less refl ective.
157
Measurement er-
rors or surface too
bright
Darken the measuring surface or
fi nd another surface.
160
Vibrations too
strong
Hold the device still.
Hardware failure
If the icon appears despite repeat-
ed switching on and off , contact
the Customer Service Hotline.
NOTE
►
If you cannot solve the problem with the aforementioned solu-
tions, please contact the Service Hotline (see chapter
Service).
IB_100719_PLEM50A1_LB1.indb 84
28.08.14 10:46
See also other documents in the category Parkside Tools:
- X3 (12 pages)
- PHP 500 A1 (10 pages)
- PHP 500 A1 (46 pages)
- PWS 125 A1 (113 pages)
- PWS 125 A1 (51 pages)
- PWS 125 A1 (51 pages)
- PWS 230 A1 (108 pages)
- PWS 125 A1 (82 pages)
- PWS 230 A1 (79 pages)
- PWS 125 A1 (67 pages)
- PWS 125 A1 (67 pages)
- PWS 230 A1 (105 pages)
- PWS 125 A1 (108 pages)
- PWS 125 A1 (82 pages)
- PWS 230 A1 (101 pages)
- PWS 125 A1 (51 pages)
- PWS 125 A1 (85 pages)
- PWS 230 A1 (45 pages)
- PWS 125 A1 (67 pages)
- PABS10.8-LI (84 pages)
- PLS 30 (19 pages)
- PHLG 2000-2 (11 pages)
- PHLG 2000-2 (12 pages)
- PHLG 2000-2 (44 pages)
- PHLG600 (35 pages)
- PHLG 2000 B1 (61 pages)
- PABS 18 A1 (61 pages)
- PABS 18 A1 (79 pages)
- PFSP 100 (64 pages)
- PFSPS150 (65 pages)
- PABS 10.8 A1 (55 pages)
- PABS 10.8 A1 (75 pages)
- PDS 200 A (10 pages)
- PAS 3.6 A1 (33 pages)
- PAS 3.6 A1 (58 pages)
- PAS 3.6 A1 (52 pages)
- PAS 3.6 A1 (66 pages)
- PAS 3.6 A1 (43 pages)
- PAS 3.6 A1 (42 pages)
- PLBS 30 A1 (89 pages)
- PLBS 30 A1 (121 pages)
- PET 25 A1 (37 pages)
- PET 25 A1 (45 pages)
- PET 25 A1 (53 pages)
- PET 25 A1 (45 pages)