Parkside PLEM 50 A1 - Manual (Page 82)

79 PLEM 50 A1
GB
The corresponding line of the icon fl ashes for the indi-
vidual measurement values.
Directly after the second measurement, the calculated area is shown
on the display and the
icon stops fl ashing. The individual
values , and the results are shown on the display .
Volumes
♦ Press the
FUNC
button twice. The icon appears on the
display .
♦ Now measure the length, width and height of the volume to
be measured by pressing the
ON
button (see also Chapter
Single measurements). The corresponding line of the icon
fl ashes for the individual measurement values.
Directly after the third measurement, the calculated volume is shown
on the display and the
icon stops fl ashing.
Simple Pythagoras
Pythagoras' Theorem describes the dependence of the lengths of the
sides in a right-angled triangle as follows: a
2 + b 2 = c 2 , where a and
b are the legs and c the hypotenuse of the triangle.
Using the "simple Pythagoras" function, it is possible to calculate the
length of one of the legs. This feature is particularly useful for poorly
accessible measurement points.
♦ Press the
FUNC
button three times. The icon appears on
the display .
♦ Now measure the hypotenuse (largest distance) and one of the
legs (shortest distance to the measurement surface) by pressing
the
ON
button (see also Chapter Single measurements).
The corresponding line of the icon fl ashes for the individual
measurement values.
IB_100719_PLEM50A1_LB1.indb 79 28.08.14 10:46