Eagle Electronics EVR-150 - Manual (Page 34)

34 EAGLE - EVR-150 Installation and Operation Instructions
5-2-1 Make a Routine Call (Individual)
You can call any other person that has another DSC equipped radio.
1. Press CALL/MENU to enter DSC mode, then select INDIVIDUAL. This allows you to call
another person.
2. Select MANUAL NEW to call a person that is not in your buddy list, otherwise select the
name of your buddy. Press ENT.
If you selected MANUAL NEW, you need to enter the user MMSI and then press ENT.
3. Select the working channel and press ENT. (Note: Duplex channels cannot usually be
called and are automatically eliminated from the suggested call list. If the call is to a
Coast Station, the radio will recognize this and select the correct channel.)
4. The radio summarizes the call details and asks for confirmation to send the call (SEND?).
Press ENT to send the call. The radio goes to CH70 and the Tx annunciator is displayed on
the screen while the DSC call is being sent.
5. If the call is acknowledged (ACK), press PTT to talk. If there is no reply, retry making the
call. See Section 5-2-2.
5-2-2 Retrying a Routine Call
1. If there is no reply to your call after one minute (UNABLE TO
ACKNOWLEDGE) the radio asks if you want to retry the call (SEND
AGAIN?).
2. Select YES and press ENT to retry the call.
The radio will repeat this cycle twice. If the call still cannot be
placed, the radio returns to normal operation.
5-2-3 Acknowledgement of an Individual Incoming Call (INDIV)
Press ENT to send an acknowledgement or ESC to cancel.
The EVR-150 will automatically send an acknowledgement to the
requesting radio within 10 seconds of receiving the call.
012345678
SEND AGAIN?
>YES
CANCEL
RCV: INDIV
012345678
ENTER –> ACK
ESC –> EXIT
DSC CALL
>INDIVIDUAL
LAST CALL
GROUP
INDIVIDUAL
>MANUAL NEW
BOBBY D
REBECCA T
MANUAL MMSID
0––––––––
012345678
INDIVIDUAL
ROUTINE
>SET CHANNEL
012345678
INDIVIDUAL
ROUTINE
>SEND?
012345678
INDIVIDUAL
ROUTINE
CALLING...
012345678
INDIVIDUAL
ROUTINE
WAITING ACK
INDIV ACK
012345678
PRESS PTT
ESC –> EXIT