Eagle Electronics EVR-150 - Manual (Page 20)

20 EAGLE - EVR-150 Installation and Operation Instructions
2-2-2 Edit an Entry
1. Select BUDDY LIST. Press ENT to display the list of entries.
2. Scroll down (if required) to the incorrect entry and press ENT.
3. Select EDIT. The cursor is at the first character of the name.
4. Edit the buddy name or, to edit only the MMSI, press ENT repeatedly until the cursor moves
to the MMSID line.
5. When you are finished, press ENT (repeatedly if necessary) to display the next screen.
6. Press ENT to store the changes. The buddy list is displayed again. If more changes are
required, repeat Steps 2 thru 6. Otherwise, press ESC to exit.
2-2 Maintain Your Buddy List (BUDDY LIST)
Use the Buddy List to store the names and associated MMSIs of 20
favourite people. Names are stored in the order of entry, with the
most recent entry shown first.
The following sections show to use BUDDY LIST to add, edit, and
delete entries on your buddy list.
Section 5 explains how to call a buddy.
2-2-1 Add an Entry
1. Select BUDDY LIST. The cursor is at MANUAL NEW. Press ENT.
2. Enter the buddy name, one character at a time (this may be alphanumeric) then press
ENT repeatedly until the cursor moves to the MMSID entry line.
4. Enter the MMSI associated with that buddy name (this must be numeric) then press ENT.
5. The new buddy name and MMSI are displayed. Press ENT to store the new entry, which is
displayed at the top of your buddy list.
Note that when the BUDDY LIST is full (20 entries), you cannot make a new entry until you have
deleted an existing entry.
MENU SELECT
>BUDDY LIST
LOCAL/DIST
BACKLIGHT
BUDDY LIST
>MANUAL NEW
ALEX
TOM
ENTER NAME
––––––––––––
ENTER MMSID
–––––––––
ENTER NAME
BOB
ENTER MMSID
123456789
BOB
123456789
>STORE
CANCEL
ALEX
>EDIT
DELETE
EDIT NAME
ALEX
EDIT MMSID
112233445
ALEX
111223344
>STORE
CANCEL
BUDDY LIST
>MANUAL NEW
ALEX
TOM