Magnum Energy AC Load Diversion Controller (ACLD-40) - Manual (Page 13)

©
2015 Sensata Technologies Page 6
Introduction
1.5 ACLD Features and Benefi ts
The ACLD controller is designed with features that allow easy access to wiring and controls.
The front
of the ACLD controller is equipped with the following (refer to Figure 1-3):
1
Status LED Indicator – this green LED illuminates to provide operation and fault
information on the ACLD controller.
2
Inverter Connection Port (orange) – a RJ11 port for connecting the ACLD controller
to the network port (green) on a the MS-PAE Series inverter.
3
Network Connection Port (green) – a RJ11 port for connecting the ACLD controller to
a Network controlled device (i.e., ME-BMK, ME-AGS-N).
4
Knockouts – four dual knockouts ( ½ ” and ¾ ”) to accommodate AC wiring access and
routing.
Info: Four additional dual knockouts ( ½ ” and ¾ ”) identical to the ones noted in Item 4
are located on the opposite side (eight dual knockouts total).
5
Intake Cooling Fan – an intake fan to pull in air to allow the ACLD controller to operate
continuously at full power.
Figure 1-3, Intake Fan, Status LED, Connection Ports, and Knockouts
ST
A TU
S
LE
D TO
INVERTER
TO
NETWORK
Inverter
Connection Port
Network
Connection Port
Intake
Cooling Fan
Dual Knockouts
( ½ ” and ¾ ”)
5 4
3 2 1
Status LED
Indicator