Meter bridge (cl-meter) – Logitek Electronic Systems Mosaic User Manual
Page 13
![background image](https://www.manualsdir.com/files/821174/content/doc013.png)
Logitek Mosaic Reference Manual
Page 13
M2
M2
M2
M2----F12 12 Slot Frame
F12 12 Slot Frame
F12 12 Slot Frame
F12 12 Slot Frame
17.55 inches (445.77 mm) wide
M2
M2
M2
M2----F18
F18
F18
F18 18 Slot Frame
18 Slot Frame
18 Slot Frame
18 Slot Frame
25.95 inches (659.13 mm) wide
M2
M2
M2
M2----F22 22 Slot
F22 22 Slot
F22 22 Slot
F22 22 Slot Frame
Frame
Frame
Frame
31.55 inches (801.37 mm) wide
M2
M2
M2
M2----F30 30 Slot Frame
F30 30 Slot Frame
F30 30 Slot Frame
F30 30 Slot Frame
42.75 inches (1085.85 mm) wide
Meter Bridge (CL-Meter)
A hardware LED Meter Bridge is available as an option. The Meter includes two high-resolution
meters – one for Program bus and one switched.
TIP:
If the Mosaic is powered on without being connected to the JetStream, no meter
LEDs will illuminate. This is normal operation; the center dot LEDs will turn on after
being connected to the JetStream and the rest of the LEDs will light as console
begins to receive meter data.
Mounting
Mounting
Mounting
Mounting
The Meter option is supplied separately and attaches to the back of the Mosaic frame with
screws (included).
The RJ-11 cable from the Meter plugs into the Mosaic tray card at the far right into the jack
labeled “Meter.”
The Meter is hinged. Gently tighten the black center screw on the rear of the hinge to lock
the meter into place at the desired angle.