Linkskey LKS-MC110ST - Manual (Page 6)

-6-
Fiber Optic Interface (FX Port)
Signal Compliance
IEEE 802.3u 100BASE-FX
Connector SC, ST, MT-RJ, VF-45, LC or Single SC
Data Speed 100Mbps
Duplex Mode Full-duplex and optional half duplex
Cable Types Multimode (MMF) - 50/125, 62.5/125
µ
m
Single mode (SMF) - 9/125
µ
m
Supported Link Distance MMF up to 2km
SMF up to 100km
Single SMF WDM up to 40km
Eye Safety compliance IEC825 Class 1
User Accessible Settings (SW)
NO.
SETTING STATE FUNCTION
SW1 TP Port Configuration OFF Auto-negotiation (default)
ON Forced mode
SW2 TP Port Duplex OFF Full duplex (default)
ON Half duplex
SW3 TP Port Speed OFF 100Mbps (default)
ON 10Mbps
SW4 Link Fault Pass Through OFF Disable (default)
ON Enable
SW5 Reserved
Optional Settings (User inaccessible JP1-JP3 on board)
NO.
SETTING STATE FUNCTION
JP1 Forwarding mode Open Store-and-forward (default)
Short Smart-forward mode
JP2 802.3x function Open Enable (default)
Short Disable
JP3 FX port duplex Open Full duplex mode (default)
Short Half duplex mode