beautypg.com

4 making tp port connection, 5 making fx port connection – Linkskey LKS-MC110ST User Manual

Page 14

background image

-14-

2.4 Making TP Port Connection

TP port is featured to support connection to :

Auto-negotiation devices

Auto-negotiation incapable 10BASE-T devices

Auto-negotiation incapable 100BASE-TX devices

Network Cables
10BASE-T:

2-pair UTP Cat. 3,4,5 , EIA/TIA- 568 100-ohm STP

100BASE-TX:

2-pair UTP Cat. 5, EIA/TIA-568 100-ohm STP

Link distance:

Up to 100 meters

Configuration Setup
To make a proper connection, the following configuration settings are
recommended:

TP port link partner

SW1

SW2

SW3

Auto-negotiation device

Off: auto

Off: full duplex

Off: 100M

Fixed 10M half duplex device On: forced

On: half duplex

On: 10M

Fixed 100M half duplex device On: forced

On: half duplex

Off: 100M

Fixed 10M full duplex device

On: forced

Off: full duplex

On: 10M

Fixed 100M full duplex device On: forced

Off: full duplex

Off: 100M

2.5 Making FX Port Connection

FX port operates on 100Mbps and full duplex (factory default). A variety
of fiber options is listed in Section 1.3

This manual is related to the following products: