Bang & Olufsen BeoVision Avant (1995-2005) - Manual (Page 4)

4
Your key to using BeoVision Avant
The Beo4 remote control integrates
remote operation of your BeoVision
Avant, and any other source which
you choose to connect to your
BeoVision Avant system.
Buttons on Beo4 remote control
Look through the basic principles of the Beo4
remote control and try them out. Each button
on Beo4 is explained below.
BANG & OLUFSEN
TV LIGHT RADIO
SAT DVD CD
V TAPE RECORD A TAPE
7 8 9
4 5 6
TEXT 0 MENU
1 2 3
LIST EXIT
STOP
GO
Switches on radio, CD, or audio cassette (A TAPE)
if a BeoLink connected audio system is available.
Switches on a connected DVD player.
Allows adjustment of the lights, if a light control
system is installed.
Select channels or enter data in on-screen menus.
Calls up a menu overlay for operating a specific
function for a source – press again to the main
on-screen menu.
Steps between available channels or e.g. tracks on
a CD – use for on-screen menu operation.
Rewinds or fast forwards a video tape – use for
on-screen menu operation.
Accepts and stores instructions or settings.
The coloured buttons have dedicated functions for
the different sources.
Exits on-screen menus.
Switches BeoVision Avant to standby.
RADIO
CD
A TAPE
DVD
LIGHT
0 – 9
MENU
▲
▼
ss tt
GO
EXIT
•
TV
SAT
V TAPE
RECORD
TEXT
TV
STAND
LIST
STOP
∧
∨
Switches on to TV channels – Press TV repeatedly
to switch between TV sources, e.g. cable, antenna.
Switches on the Satellite receiver and the Avant TV
to watch Satellite channels.
Switches on a VCR and the Avant TV at the same
time.
Press twice to start a recording here and now
Press to activate closed captioning.
The Beo4 display – shows the current source, TV,
or extra sources or buttons called up via the LIST
button.
Reveals more sources or functions in the Beo4
display, e.g. STAND.
Stops playback on a VCR or DVD player or stops a
recording – press STOP to return to a previous on-
screen menu.
Adjusts volume – press in the middle to mute the
sound.