Loudspeaker setup, Information – Bang & Olufsen BeoVision 9 User Guide User Manual

Page 52

Switch on the TV in TV or Home cinema mode

before you adjust speaker settings for either
mode.

Select speaker setup

Select ‘SOUND’ in ‘OPTIONS’

Switch on TV and bring up ‘TV

SETUP’ menu

Sound during setup

Speaker roles

During the setup process, a sound is sometimes produced by a speaker. Check
if the highlighted speaker matches the name of the speaker making the sound.

You must select the surround speakers before you can select the back

speakers.

Set speaker type

Register the type of each speaker in the menu.
Each Bang & Olufsen speaker makes a sound and
is highlighted on the screen.

Select the function for each connected

loudspeaker, such as front, back or surround. A
speaker can have more than one role – one for TV
viewing and one for Home cinema viewing.

Set speaker role

Loudspeaker setup

Select speaker and reveal

speaker type

Select ‘SPEAKER TYPES’ menu

Reveal speaker role for each

speaker

Select ‘SPEAKER ROLES’ menu

Add Power Link speakers and up to two BeoLab subwoofers to your TV and you

have a surround sound system.

Select menu

Information

NOTE! To make a Home cinema setup, you must

first switch to Home cinema mode. For

information about Home cinema, see p. 22.

TV (1)

Home cinema (2)

A: Right front

Left front

B: Left front

Left surround

C: Off

Left back

D: Off

Right back

E: Left back

Right surround

F: Right back

Right front

G: Off

Centre

Set speaker role.