First-time setup of your television, Information – Bang & Olufsen BeoVision 9 User Guide User Manual

Page 50

First-time setup of your television

*TV tuner

Connections

If you select ‘CABLE BOX’, follow the on-screen information to specify which
cable box you have connected to the TV. If you select ‘ANTENNA’ or ‘CABLE’,
a scanning process begins when you store the setting.

Select the type of equipment connected to each socket, the sockets used, the

product name, and the source name.

Information

This first-time setup procedure is activated when the TV is connected to the mains

and switched on for the first time. If you want to change your setup at a later date,
you can access the same menus and update your settings.

Switch on the TV

Make settings

You are led through the following settings only

when you switch on the TV for the first time.*

It takes the TV approx. 20 seconds to start up and
become ready for use.

Switch on

Select setting

Accept and go to next menu item

Disable or enable internal TV tuner or ATSC, see p. 35*1
Register connected equipment, see p. 43

* NOTE! When you have made the preferred

settings in a menu, you may have to press the
green button to continue to the next menu in the

first-time setup procedure. Follow on-screen

instructions.

TUNER SETUP

CONNECTIONS