Bang & Olufsen BeoVision 9 User Guide - Manual (Page 49)

“Greyed out” sockets on the illustration of the main connection panel may be occupied by internal connections. Do not
disconnect the cables from these sockets!
NOTE! Video recorders can only be connected to
the AV1 and AV2 socket groups, as these are the
only sockets groups for video output. Connect the
primary recorder to AV1 and the secondary
recorder to AV2. Headphones
POWER LINK 1 (SUB)
POWER LINK 2–6
To mute speakers turn the volume wheel quickly counter-clockwise. Turn the
volume wheel either way to adjust volume in headphones. To restore sound in
speakers, turn the volume wheel quickly counter-clockwise.
Use a cable splitter to connect two Bang & Olufsen subwoofers.
For external speakers in a surround sound setup. See also pp. 50–51.
Connect stereo headphones.
AV1
Socket group for AV connection of a primary
video recorder, set-top box, or other types of
extra video equipment.
AV2
Socket group for AV connection of additional
video equip ment.
AV3
Socket group for AV connection of additional
video equip ment.
The TV keeps a signal path open between a
recorder connected to the AV1 socket area and a
recordable source connected to the AV3 socket
area.
This allows you to set the source on AV3 to switch
on automatically, as well as set a recorder on AV1
for timed recording of the source on AV3, provided
your connected equipment supports these
functions.
AV4
Socket group for AV connection of additional
video equipment.
AV5
This socket group is only available if your TV is not
equipped with a BeoMaster. Use this socket group
for equipment which you do not wish to have
permanently connected, e.g. a camera or a
camcorder.
AV6
Use this socket group for equipment which you do
not wish to have permanently connected, e.g. a
camera or a camcorder.
VIDEO IN (AV1–AV6)
For video signal.
VIDEO OUT (AV1–AV2)
For a video recorder.
L-IN, R-IN (AV1–AV6)
Right and left line input.
L–R OUT (AV1–AV2)
Right and left line output.
Y – Pb – Pr (AV2–AV3)
For video signals from an external source, e.g.
HDTV source. You can use the socket in
conjunction with an AV socket or a digital audio
socket.
SPDIF (AV1–AV6)
Digital audio input socket, e.g. DVD player.
CTRL (AV1–AV6)
For IR control signals to external equipment
connected to an AV socket.
S VIDEO (AV4, AV6)
For S-VHS or Hi-8 Camcorders.
DISPLAY 2 (DVI-D OUT)
Connect a projector.
HDMI IN (A–D)
For High Definition Multimedia Interface video
source or PC. The sources can be registered to any
of the AV socket groups. Connect an HDMI
Expander to the HDMI C socket.
VGA
Socket for connection of a High Definition video
source or a PC.
ANT (1–3)
Aerial input socket (1) for future use (2) for ATSC
tuner (3) from external aerial/cable TV network.
MASTER LINK
For a compatible Bang & Olufsen audio system.
Available if the TV does not have a BeoMaster.
DTV DATA
For future use.
CINEMA
For a Home Automation System.
TTL/RS232
Only for use in Hotel setups.
IR IN
For an extra IR-receiver when the TV is set up with
a projector.
IR 1+2
For an external IR-transmitter used with Home
cinema setups.
47