First-time setup of your television, Information – Bang & Olufsen BeoSystem 3 Getting Started - No ATSC User Manual

Page 22

First-time setup of your television

Connections Select the type of equipment connected to each socket, the sockets used, the

product name, and the source name.

Information

This first-time setup procedure is activated when the TV is connected to the mains

and switched on for the first time. If you want to change your setup at a later date,
you can access the same menus and update your settings.

Switch on the TV

Select settings

You are led through the following settings only

when you switch on the TV for the first time.*

However, the sequence of menus depend on the
connections and settings you make.

It takes the TV approx. 20 seconds to start up and
become ready for use.

Switch on

Select setting

Accept and go to next menu item

Disable or enable the navigation button on your remote control*

Disable internal TV tuner
Register connected equipment

*NOTE! When you have selected the preferred

settings in a menu, you may have to press the
green button to continue to the next menu in the

first-time setup procedure. Follow on-screen

instructions.

REMOTE CONTROL

TUNER SETUP

CONNECTIONS