Edelbrock 33505 - Manual (Page 5)

9(g) Clamp supplied spanner wrench (see Fig. 16) in
vise (see Fig. 18) to support threaded adapter
torque nut to 75 ft lbs. with 7/8 socket.
Fig. 18
9(i) Assemble shock by screwing the adapter with
Loctite applied into clevis (see Fig. 20),
Fig. 20
screw the adapter in clevis until it bottoms (see
Fig. 21), torque to 70 ft lbs. using same spanner
wrench (see Fig. 16).
Fig. 21
9(j) Screw the thin threaded adapter jamb nut with
Loctite applied until it bottoms and torque to 70- ft
lbs. with spanner wrench.
9(h) Clamp clevis in vise. Install spring on clevis
spring seat (see Fig. 19).
Fig. 19