Bang & Olufsen BeoPlay V1 Getting Started - Manual (Page 4)

Cautions
– Ensure that the television is positioned, set up
and connected in accordance with the
instructions in this Getting Started. To prevent
injury, use Bang & Olufsen approved stands and
wall brackets only!
– Place your television on a firm, stable surface.
– Do not place any items on top of your television.
– Do not subject the television to rain, high
humidity or sources of heat.
– The television is intended for indoor use in dry,
domestic environments only. Use within a
temperature range of 10–40°C (50–105°F).
– If the television has been exposed to
temperatures below 5°C (40°F), leave it at room
temperature and wait until the television has
regained normal room temperature before it is
connected to the mains and switched on.
– Do not place the television in direct sunlight or
direct artificial light, such as a spotlight, as this
may reduce the sensitivity of the remote control
receiver. Also if the screen is overheated, black
spots may appear in the picture. These spots
disappear again, once the television cools down
to normal temperature.
– Leave enough space around the television for
adequate ventilation.
– No naked flame sources, such as lighted candles
should be placed on the apparatus.
– To prevent the spread of fire, keep candles or
other open flames away from this product at all
times.
– Do not attempt to open the television. Leave
such operations to qualified service personnel.
– Do not strike the glass with hard or pointed items.
– The television can only be switched off completely
by disconnecting it from the mains socket. The
mains socket must always be accessible.
– Follow instructions to ensure correct and safe
installation and interconnection of equipment in
multimedia systems.
– The product label is placed behind the
connection cover.