Copy from the timeshift buffer – Bang & Olufsen BeoVision 11 with Beo4 User Guide User Manual
Page 35

35
The timeshift buffer is a temporary
storage. If you change source, channel or
station, or if you switch off the TV, the
buffer content is deleted. To keep a
recording, you can copy it from the
timeshift buffer to the HARD DISK
CONTENT menu by making a manual
recording. If you start a manual recording
during timeshift, the recording starts from
the start time of the programme. If you
switch channel after a programme has
started, the recording will start from
there. For more information, see Getting
Started.
Copy to the hard disk…
Press to pause timeshift
Press to start playback
Press to cue backwards to you
see the programme you want
to record
Press to start recording to the
hard disk
.*
1
The content before the recording
start time will be deleted.
1
*If a manual recording is started during
timeshift, the part of the timeshift that belongs
to the programme will also be a part of the
new recording.
After copying from timeshift to the HARD
DISK CONTENT menu, you can edit the new
recording, as you can edit any other recordings.
NOTE! The programme provider may have
some restrictions on what can be recorded
or timeshifted. The recorded programme
may also be available for a limited time
period. Contact your programme provider
for information about recording policy.
Copy from the timeshift buffer
>> Record a programme
STOP
PLAY
MENU
Time shift buffer
Hard disk content