Bang & Olufsen BeoVision 11 with Beo4 Getting Started User Manual
Page 4
Cautions
– Ensure that the television is positioned, set up
and connected in accordance with the
instructions in this Getting Started. To prevent
injury, use Bang & Olufsen approved stands and
wall brackets only!
– Place your television on a firm, stable surface.
– Do not place any items on top of your television.
– Do not subject the television to rain, high
humidity or sources of heat.
– The television is intended for indoor use in dry,
domestic environments only. Use within a
temperature range of 10–40°C (50–105°F), and
at an altitude of no more than 1,500 m (5,000 ft).
– If the television has been exposed to
temperatures below 5°C (40°F), leave it at room
temperature and wait until the television has
regained normal room temperature before it is
connected to the mains and switched on.
– Do not place the television in direct sunlight or
direct artificial light, such as a spotlight, as this
may reduce the sensitivity of the remote control
receiver. Also if the screen is overheated, black
spots may appear in the picture. These spots
disappear again, once the television cools down
to normal temperature.
– WARNING: Do not expose this equip ment to
dripping or splashing and ensure that no objects
filled with liquids, such as vases, are placed on
the equipment.
– Leave enough space around the television for
adequate ventilation.
– Connect all cables before connecting or
reconnecting any of the products in your system
to the mains.
– No naked flame sources, such as lighted candles
should be placed on the apparatus.
– To prevent the spread of fire, keep candles or
other open flames away from this product at all
times.
– Do not attempt to open the television. Leave
such operations to qualified service personnel.
– Do not strike the glass with hard or pointed items.
– The product can only be switched off
completely by disconnecting it from the mains
socket. The mains socket must always be
accessible.
– Follow instructions to ensure correct and safe
installation and interconnection of equipment in
multimedia systems.
– The product label is placed behind the
connection cover.
WARNING: To reduce the risk of fire or
electric shock, do not expose this
appliance to rain or moisture.
The lightning flash with arrowhead
symbol within an equilateral triangle,
is intended to alert the user to the
presence of un insulated “dangerous
voltage” within the product’s en closure that
may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important
operating and main tenance (servicing)
instructions in the literature accompanying the
product.