Bang & Olufsen BeoVision 11 with Beo4 Getting Started - Manual (Page 22)

Set up your television
Important
To ensure proper ventilation, allow enough space around the screen. At over heating (flashing standby
indicator and an on-screen warning), switch the TV to standby, not off, in order for the TV to cool
down. You cannot operate the TV during this time.
If the front screen glass should crack or chip, or if it should be damaged in any way, it must be replaced
immediately, as it could otherwise cause injury. You can order replacement front screen glass from your
Bang & Olufsen retailer.
Ventilation
Front glass
We recommend that you place the TV in the
packaging while you fasten the wall bracket or the
bracket for the stand to the back of the TV.
Set the maximum angle the TV will turn on the
motorised stand or wall bracket. The wall bracket
without a motor can manually be turned 90˚ left or
right depending on your setup. Remember to leave
enough space around the TV to allow it to turn
freely.
The TV has several placement options. Refer to
www.bang-olufsen.com for available stands and
wall brackets or contact your Bang & Olufsen
retailer.
Due to the weight of the TV, any moving or lifting
of the TV should be performed by qualified
personnel – using the proper equipment.
Handling
Wall bracket and stand
Placement options
The television has several placement options. Follow the guidelines for placement
and connection.
22