Bang & Olufsen BeoVision 11 with Beo4 Getting Started - Manual (Page 12)

Pause and play back a programme
Information
1 *Timeshift The timeshift buffer memory is 4 hours. If a programme remains paused until the buffer is full, you must
press PLAY to continue saving to the buffer and thereby delete the oldest content. If you change source,
channel or station, or if you switch off the TV, the buffer content is deleted. For more information
about the timeshift buffer, see the online guide.
With the optional hard disk recorder you can pause, repeat
and resume a digital programme in progress. The television
continues saving during timeshift, so you are sure to see the
entire programme.
Operation
Pause a programme
Step between programmes
Step or cue backwards or forwards
Pause playback
Switch to the live signal
Go to the previous or next programme in the timeshift buffer.
Pause playback of the timeshift buffer content.* 1
Go to a specific point
Step backwards or forwards minute by minute.
Switch from timeshift mode to the live signal.
Enter a specific time to go to in the timeshift buffer content.
Pause the programme on the current channel.
Play back
Play back a programme that you have paused.
HBO 9 | TV
Independence Day RATING 6 09:30 – 11:50
PROGRAM 3 / 3 PAUSE 07:10 – 10:15
12
After ‘Now showing’
(dotted = buffered.
White = unbuffered)
Current
programmes
in buffer
Total number of
programmes
Before ‘Now
showing’ (red =
buffered. Grey =
unbuffered)
‘Now showing’
indicator
Start/stop
time of
current
programme
Buffer start
time
Playback point
(‘Now showing’)