Lanner LEC-7070 - Manual (Page 8)

8
System Components
Chapter 2
Embedded and Industrial Computing
Front Components
sPEEd LINK/ACT
F2 F6 F3 F5 F4 F1
Component Description Pin Definition
Reference
F1 Reset Reset switch
F2 MIC IN/LINE OUT Connect the audio devices to these ports.
The Microphone and line out port are
provided by Realtek ALC 886.
LIN1, MIC1 on page 13
F3 Four USB 2.0 Ports An USB type A connector. USB1, USB2 on Page
14
F4 Two 10/100/1000Mbps LAN ports Two RJ-45 (network) jacks with LED
indicators as described below. Both LAN
ports are provided by Intel 82583V. The
82583V supports PXE remote boot
LINK/ACT (Yellow)
On/Flashing: The port is linking and •
active in data transmission.
Off: The port is not linking.
•
SPEED (Green/Amber)
Amber: The connection speed is •
1000Mbps.
Green: The connection speed is
•
100Mbps
Off: The connection speed is 10Mbps.
•
LANB1/LANB2 on
page 14
F5 HDD (Yellow)
3G Status (Green) and
Power LED (Green) HDD
Blinking: data access activities •
Off: no data access activities •
3G Status
Blinking: 3G transmission activities •
On: 3G expansion card exists •
Off: no 3G expansion card exists •
Power
On: The computer is on. •
Off: The computer is off . •
F6 Power-on Switch A power-on switch through the Phoenix
contact for distant power-on/off control
PSBTN2 on page 15
F7 Power Button with dual LED ATX Power-on button with LEDs: Standby
mode in Red; Power-on mode in Green
F7