Lanner LEC-7070 - Manual (Page 17)

17
Hardware Setup
Chapter 4
Embedded and Industrial Computing
Installing a CFast Card
LEC-7070 provides one CFast slot. Follow the procedures
bellow for installing a CFast card.
Align CFast card and the card slot with the arrow 1.
pointing toward the connector.
Push the card to insert into the connector. Note that the
2.
CFast card’s orientation should match the connector’s
pin. It may face down.
Installing a 3G SIM Card
Unlock the SIM card reader by sliding it outward and 1.
flip it up diagonally.
Align the cut-corner of the SIM card with the SIM card
2.
reader. Make sure that the ICs will be in contact with
the bottom of the reader.
Insert the
3. SIM card into the reader diagonally. Close
and lock the reader. You should feel a click when the
SIM card is locked securely in the reader.
Installing a Wireless 3G Module
Align the wireless module’s cutout with the Mini-PCIe 1.
slot notch.
Insert the wireless module into the connector
2.
diagonally.
Fasten the wireless module to the board with the
3.
screws (Use the Mini-PCIe module screws contained
within the package).
Installing a Wi-Fi Module
Follow the same steps as the Wireless 3G Module
Installation.
SIM Card
3G module
Unlock lock