Lanner LEC-7070 - Manual (Page 19)

19
Digital Input/Output Control
Appendix A
Embedded and Industrial Computing
Appendix A:
Digital Input/Output
The Digitanl I/O on the rear panel is designed to provide
the input and output operations for the system. For
sample DIO code, look for LEC-7070 Utility on the Driver
and Manual CD. Make sure that you have installed the
Lanner GPIO driver as instructed below.
Driver Installation
Before you could access or control the operation of the
GDigital I/O functions, install the the L_IO driver which is
the library and driver needed for Lanner General Purpose
Input/Output interface or functions.
To install the L_IO driver:
Restart the computer, and then log on with 1.
Administrator privileges.
Insert the Drivers and User’s Manual CD to the USB-
2.
optical drive.
Browse the contents of the support CD to locate the
3.
file in the LIO folder.
From the control panel, click the ADD Hardware
4.
program
Select Next to proceed 5.
Answer “Yes” to the question and select Next to 6.
proceed.
Select Add a new hardware device. 7.