Receiving a call 10, redialling a num- ber 10, Redialling a number, Receiving a call – Ericsson I 888 WORLD User Manual
Page 14
Checking the first characters
If you have entered more characters than can be seen in
the display, the first characters will be replaced by the
l
symbol. To check the first characters:
l press the navigation key
RIGHT
.
Receiving a Call
When you receive a call, the phone rings and the indica-
tor light on top of the phone blinks green rapidly. The
display shows ‘Answer?’.
If your subscription includes the Calling Line Identifica-
tion service and the caller’s network sends the number,
you will see the caller’s number at the bottom of the
display. If the number is stored with a name in the
phone book, the name will be shown in the display.
Note!
The phone must be turned on and within coverage of a
network before a call can be received.
To Answer the Call
Open the flip.
If the flip is already open; press
YES.
When the call is finished, press
NO
;
or close the flip.
Tip!
To mute the ring signal when you receive a call, press
CLR
.
To Reject the Call
There are two ways of rejecting the call:
•
Press the
NO
key.
•
Press the volume key on the side of the phone
twice.
The caller will hear a busy tone if the caller’s network
supports this function. If ‘Divert on busy’ is activated,
the incoming call is diverted to the number you have
specified (see ‘Diverting Incoming Calls’).
Redialling a Number
Your I 888 WORLD conveniently lets you redial the last
phone numbers you have called (15 or more, depend-
ing on your SIM card). It can also redial a number auto-
matically if the connection failed when you first called.
To Redial Previously Called Numbers
Press
YES
. The display now shows the last di-
alled number.
Press the navigation key
RIGHT
or
LEFT
until the
number you want to call is shown on the
bottom row of the display.
Press
YES
to make the call.
Note!
If you want to clear the last dialled numbers memory,
do the following:
Press the navigation key
LEFT
. The ‘Phone book’
menu appears.
Press
YES
to enter the ‘Phone book’ menu.
Press the navigation key
LEFT
until the ‘Dialled
numbers’ function appears.
Press
YES
to select the ‘Dialled numbers’ func-
tion.
Press and hold the
CLR
key. The question ‘Erase
all?’ appears.
Press
YES
to erase the last dialled numbers from
the memory.
Press
CLR
to return to standby mode.
The Automatic Redialling Function
If the connection fails and the receiver’s network
supports it, the display shows ‘Retry?’ on the top row
and the reason for the failure on the second row.
10
Press
to enter the menu system. See inside the cover.
Checking the first characters
If you have entered more characters than can be seen in
the display, the first characters will be replaced by the
l
symbol. To check the first characters:
l press the navigation key
RIGHT
.
Receiving a Call
When you receive a call, the phone rings and the indica-
tor light on top of the phone blinks green rapidly. The
display shows ‘Answer?’.
If your subscription includes the Calling Line Identifica-
tion service and the caller’s network sends the number,
you will see the caller’s number at the bottom of the
display. If the number is stored with a name in the
phone book, the name will be shown in the display.
Note!
The phone must be turned on and within coverage of a
network before a call can be received.
To Answer the Call
Open the flip.
If the flip is already open; press
YES.
When the call is finished, press
NO
;
or close the flip.
Tip!
To mute the ring signal when you receive a call, press
CLR
.
To Reject the Call
There are two ways of rejecting the call:
•
Press the
NO
key.
•
Press the volume key on the side of the phone
twice.
The caller will hear a busy tone if the caller’s network
supports this function. If ‘Divert on busy’ is activated,
the incoming call is diverted to the number you have
specified (see ‘Diverting Incoming Calls’).
Redialling a Number
Your I 888 WORLD conveniently lets you redial the last
phone numbers you have called (15 or more, depend-
ing on your SIM card). It can also redial a number auto-
matically if the connection failed when you first called.
To Redial Previously Called Numbers
Press
YES
. The display now shows the last di-
alled number.
Press the navigation key
RIGHT
or
LEFT
until the
number you want to call is shown on the
bottom row of the display.
Press
YES
to make the call.
Note!
If you want to clear the last dialled numbers memory,
do the following:
Press the navigation key
LEFT
. The ‘Phone book’
menu appears.
Press
YES
to enter the ‘Phone book’ menu.
Press the navigation key
LEFT
until the ‘Dialled
numbers’ function appears.
Press
YES
to select the ‘Dialled numbers’ func-
tion.
Press and hold the
CLR
key. The question ‘Erase
all?’ appears.
Press
YES
to erase the last dialled numbers from
the memory.
Press
CLR
to return to standby mode.
The Automatic Redialling Function
If the connection fails and the receiver’s network
supports it, the display shows ‘Retry?’ on the top row
and the reason for the failure on the second row.
LAST DIALLED
L
R
046998877