Ericsson I 888 WORLD User Manual
Page 12
Press
CLR
to return to standby mode.
Note!
If by accident you end up with your phone displaying a
language you do not understand, you can return to Eng-
lish by pressing
LEFT
0000
RIGHT
at any time.
Setting the Time
The time is shown at the bottom of the display. When
you buy your phone, the time is normally not set.
If you want to set the time:
Press the navigation key
LEFT
until the ‘Clock’
menu appears.
Press
YES
to enter the ‘Clock’ menu.
Press the navigation key
RIGHT
until the ‘Set
clock’ menu appears.
Press
YES
to enter the ‘Set clock’ function.
Enter the correct time in hours and minutes and
press
YES
.
Press
CLR
to return to standby mode.
Note!
The time is by default presented in the 24-hour format.
If you prefer the 12-hour format, you can change the
default setting.
For more information, see ‘Personalizing Your Phone’.
To Set the Ring Signal Level
Press the navigation key
RIGHT
.
The text ‘Ring level’ and a bar representing the
ring signal level appears in the display.
Press
YES
to enter the ‘Ring level’ menu.
Use the navigation key to set the ring signal
level.
• Pressing
RIGHT
increases the volume.
• Pressing
LEFT
decreases the volume.
The phone rings once with the actual setting as
you press the navigation key, except for the
‘Off’ and ‘Step’ settings.
Press
YES
to save the setting.
Press
CLR
to return to standby mode.
Tip!
Use the volume keys on the side of the phone to change
the ring level silently.
Note!
If you have your I 888 WORLD connected to external
equipment (for example handsfree equipment or a vi-
brating call alert device), the ring signal level will be set
for this situation separately. See ‘Personalizing Your
Phone’ for more information.
8
Press
to enter the menu system. See inside the cover.
MENU
L
Clock
R
CLOCK
L Set clock R
(16:36)
SET CLOCK
L
(16:36)
R
11:45
MENU
L Ring level R
(QQQqqq)