Lanner LEC-2280E-7BN4/8 - Manual (Page 9)

9
System Components
Chapter 2
Embedded and Industrial Computing
Rear Components
Component Description Pin Definition Reference
R1 DC-In (power) 1x2 Pin
Phoenix Contact Connector
Power-in Connector. The LEC-2280-
7BN4/8 support power range between
+9~+30V DC-in.
CN4 on page 20
R2 Two USB 2.0 Ports An USB type A connector. In addition to
this connector, an internal pin header is
also provided..
USB3 Connector on Page 17
R3 Two 10/100/1000Mbps LAN
Ports
Two RJ-45 (network) jacks with LED
indicators as described below. The LAN
ports are provided by Intel 82574L.
They both support WOL/Remote-
wake-up/PXE function.
LINK/ACT (Yellow)
On/Flashing: The port is linking •
and active in data transmission.
Off: The port is not linking.
•
SPEED (Green/Yellow)
Yellow: The connection speed is •
1000Mbps.
Green: The connection speed is
•
100Mbps
Off: .The connection speed is
•
10Mbps.
LAN1/LAN2 on page 21
R4 DVI-D A DVI-D port (single link) which is
provided by Intel HD Graphic Engine.
This port can support up to 1920x1200
@ 60 Hz resolution.
DVID1 Connectors on page 19
R5 HDMI A HDMI (High-Definition Multimedia
Interface). This port can support up to
1920x1200 @ 60 Hz resolution.
HDMI1 on page 19
R6 VGA Port(†) The displays can support VGA up to
2048x1536 resolution.
VGA1 on page 19
R7 COM1 Port An RS-232 port COM1 on page 16
R8 Two 10/100/1000Mbps
LAN ports
Two RJ-45 (network) jacks with LED
indicators as described below. The LAN
ports are provided by Intel 82574L.
R9 Four 10/100/1000Mbps
LAN Ports(*)
Four RJ-45 ports with LED indicators
connected to the PCIe expansion slot.
The LAN ports are provided by Intel
82574L.
PCIEIO1 Connector on page 19 and the
Ethernet adaptor specs on page 14
†Note that the driver for these ports should be installed with the following order: Chipset INF->Graphic->Audio
* They are only on Model LEC-2280-7BN8. Model LEC-2280-7BN4 doesn’t include a quad-port Gigabit Ethernet
adaptor..
R9
R2 R6 R1
sPEEd LINK/ACT
R3 R5 R4
R7
R8