Lanner LEC-2280E-7BN4/8 - Manual (Page 14)

14
Board Layout
Chapter 3
Embedded and Industrial Computing
PL8608 X 4 PCIe Expansion Card
The following picture shows the PL8608X4 card
connected to the PCIEIO1connector on the main board of
the LEC-2280E-7BN8 via a riser card (PCIe x8). The card’s
specifications are also listed below.
Network controller-processors
• 4x Intel 82574L
PCI Express 2.0 bus width
• X4 lane operable in X4, X8, X16 slots
Connectors
• 4x RJ45
LED indicators:
• Link/Activity LED: off=no link; on=link; blinking=activity
• Speed LED: off=10Mb; green=100Mb; yellow=1000Mb
Wiring
• Category-5 UTP, 4-pair
Data rate supported per port
• 10, 100, 1000Mbps
Cable distance
• 100m category-5 for 100/1000Mbps
IEEE standards/Network technology
• 10/100/1000BASE-T
Typical power consumption
• 7W
Operating temperature
• 0 ~ 550C
Storage temperature
• -20 ~ 700C
Dimensions
• Length(130mm)
• Height of PCB(87mm)
• Height of full-height end bracket(121mm)