Lanner LEC-6020 - Manual (Page 4)

4
Introduction
Chapter 1
Embedded and Industrial Computing
Chapter 1:
Introduction
Thank you for choosing the LEC-6020. The LEC-6020
series is an industrial cyber security appliance featuring a
different number of serial communication ports as well
as Ethernet ports in a compact frame design (65mm(W)
x146mm(H) x127mm(D)).
The LEC-6020 has an innovative industrial and mechanical
design. It can be placed on desk or mounted on din-
rails. This reduces maintenance effort when the device
is installed in an industrial setting where access is not
convenient.
The LEC-6020 also features a solid and sealed aluminum
extrusion framing.
Here is the summary of the key capabilities of LEC-
6020:
Onboard Intel Atom N2600 with Intel NM10 chipset •
4 serial ports (on model A only) and one serial port •
(on model C, D)
Two, five or seven gigabit Ethernet RJ-45 or optical
•
fiber ports (all ports have magnetic isolation protection
of 1.5 KV). Moreover, these ports are capable of LAN
bypass, supporting dynamic disconnection/bypass
on a host system failure, power off or upon software
request.
Two or four USB ports depending on the model
•
number
Power input via Phoenix contact with power failure
•
relay (B, C, D only)
Please refer to the following chart for a detailed description
of the system's specifications.
System Specification
Processor Options Intel® Atom™ N2600 1.6 GHz
Chipset Intel NM10
BIOS AMI 8Mbit SPI Flash ROM
System
Memory
Sockets 1 x 204-pin DDR3 SODIMM socket
Technology
Dual-Channel DDR3 1066/1333MHz,
unbuffered, Non-ECC
Max. Capacity 2 GB
USB
LEC-6020A: USB 2.0 compliant hosts x
4, Type A connector
LEC-6020B/C/D: USB 2.0 compliant
hosts x 2, Type A connector
Expansion Bus Mini-PCIe (LEC-6020A only)
OS Support
LEC-6020A/B/D: Linux 2.6, Windows
XP Embedded, Window XP, Window 7
Embdded
LEC-6020C: Linux 2.6, Windows 7
Embedded
Storage
NAND Flash None
HDD Support
SATA connector for SSD/HDD expan-
sion, HDD mounting kits (by request)
Expansion CompactFlash socket Type I/II x1
Networking
LAN
LEC-6020A: 3 x 10/100/1000 Mbps
ports, Autosensing, RJ45, with one pair
of LAN bypass.
LEC-6020B: 5 x 10/100/1000 Mbps
ports, Autosensing, RJ45, with two pairs
of LAN bypass
LEC-6020C: 5x10/100/1000Mbps
ports, Autosensing, RJ45, with one pair
bypass. 2x Gigabit SFP
LEC-6020D: 5x10/100/1000Mbps
ports, Autosensing, RJ45, with one pair
bypass.
Controller
LEC-6020A: Intel 82574L x 3,
LEC-6020B/D: Intel 82574L x 5,
LEC-6020C: Intel 82574L x 2, Intel
I210x5
Magnetic Isolation
Protection
1.5 KV built-in
Serial Interface
Serial Standard
LEC-6020A: 2 x 10 pin terminal block
for 4 x RS-232/422/485, 1 x internal
header (RS232 only)
LEC-6020B: 1 x internal header for
RS-232
LEC-6020C/D: 1 x DB9 for RS-232
ESD Protection 15 KV for all signals
Serial Signals
RS-232 RTS, Rx, Tx, CTS, GND
RS-422 TxD+, TxD-, RxD-, RxD+, GND
RS-485 Data+, Data-, GND
Baudrate Supports 50 bps to 115.2 kbps
Display
Graphics Controller Intel® GMA 3600
Display Interface internal pin header
LEDs
LEC-6020A: Power, Storage, Run (user
defined), 3 x User defined, 4 x Rx, 4
x Tx.
LEC-6020B/D: Power, Storage, Run
(user defined), 3 x User defined
LEC-6020C: Power, Storage, Run(User
defined), 3x User deined, 2x SFP.