Lanner AV-ICE02 - Manual (Page 25)

Software User Manual Version 1.0.1
22
runTests=63 Run all tests. (default)
runStateful=1 Enable stateful compression tests. Applies when
compression code tests are run
configFileVer Version of configuration file. Can be 1 or 2
(default).If you are using the original version 1
configuration file, use 1.For configuration file
details, see the Intel® Communications Chipset
8925 to 8955 Series Software Programmer’s
Guide.
wirelessFirmware Wireless Firmware enabled. Can be 0 (default) or
1. For configuration file details, see the Intel®
Communications Chipset 8925 to 8950 Series
Software Programmer’s Guide.
4.2.1 signOfLife Tests
The signOfLife parameter is used to specify that a subset of the sample tests are
executed with smaller iteration counts. This provides a quick test to verify the
acceleration software and hardware are set up correctly.
Note: If the signOfLife parameter is not specified, the full run of tests can take
several hours to complete. In addition, for RSA 4096 and DH 4096 tests, there can
be up to an hour with no perceived result activity.