Lanner AV-ICE02 - Manual (Page 20)

Software User Manual Version 1.0.1
17
-If you are not using virtualization, verify the Kernel option intel_iommu=off has
been configured as specified in 2.3 Updating Grub Configuration File
-If you are not using virtualization, verify you are starting the service in a guest
Operating System and not the host Operating System.
-Verify the Intel Communications chipset 895x is enumerated properly by using
the lspci command.
To stop the software, issue the following command:
# service qat_service stop
To stop the software and remove the kernel driver, issue the following command:
# service qat_service shutdown
When the Acceleration software is installed, it is set to load automatically when the
Operating System loads.
Note: If the following error message is returned: icp_qa_al err: adf_aeUcodeMap:
Mapping of Firmware failed, status=0xa116 “UOF is incompatible with the chip
type/revision” you have attempted to install the software package on a system
without the latest Intel® Communications Chipset 895x Series silicon.