Lanner AV-ICE02 User Manual

Page 17

Software User Manual Version 1.0.1

environment).

2. During the instllation, the following message is displayed:

*** No error detected in InstallerLog.txt file ***

At the end of the installation, the following messages are displayed:

*** Acceleration Installation Complete ***

Refer to the InstallerLog.txt file for additional detail on the installation. It is also a good
idea to check /var/log/messages or dmesg to make sure that the acceleration service
started. Warning messages related to Invalid core affinity can be addressed by
modifying the configuration files dh89xxcc_aq_dev0.conf and h89xxcc_qa_dev1.conf)
so that no core numbers are referenced beyond the core count of the system.

Note: After building/installing the Acceleration Software, it is highly recommended to

secure the build output files (the files located in $ICP_ROOT\build) by either

deleting them or setting permissions according to your needs.

3. Use the 0 option to exit the installation.

4. After installing the Acceleration software, it is recommended to verify that the

acceleration software kernel object is loaded and ready to use. This can be done

by performing the following operation:

# lsmod | grep icp_qa_al

icp_qa_al is not returned, then the acceleration software is not installed and is

not ready for use. Refer to the Installer.log file in the /QAT directory for additional

information. If necessary, run the installation script again and select Install

Acceleration.